Spline-Drive Carbide Drill Bit with a two carbide cutter head.
1/2" Diameter X 16" Overall Length with a 11" drilling depth with a Spline-Drive Shank.
This two carbide cutter head design has been steadily improved over the years and meets the professional user's highest technical requirements. The dynamic two cutter head proves its excellent qualities time and again in practice under the toughest conditions. The drill bit head has a unique 130 Degree Carbide tip angle which helps facilitate centering. The improved quality of the two cutter head design rapidly penetrates the material and quickly channels the drilling dust into the large volume H-flute. It is a cost effective solution for faster drilling. The use of high quality alloy steel in conjunction with specialized hardening, surface treatment, and soldering techniques produces a durable drill bit. These carbide drill bits are made exclusively from "GN 1000" carbide. They are vacuum brazed with pure copper at 1900* F for a perfect braze.The result is round, previse holes.
FOR USE IN CONCRETE, MASONRY & NATURAL STONE
These bits fit following roto-hammers:
Bosch--11202, 11203, 11204, 11205, 11209,11214, 11219, 11220, 11232, 11233
AEG--PH 380, PH 260, PH 350, PHD 38
B&D--5041, 5042, 5043, 5044, 5045, 5049, 5093, 5095, 5096, 5098, 50593, 50595, 50596, 50598
Metabo--RH 66, RH 99, 1129, 6030
Makita--HR3851, HR5000
Ramset--442, 445, 475
Red Head--747-2
Ryobi--PK 382
Kango--637S, 950S, 430S
Milwaukee--5343, 5347, 535352, 5341
Hitachi--DH 38 YE, DH 50 SB