Details
TAPCON 3/16" X1-1/4" SCREWS FLAT HEAD PHILLIP
part # 2803-0010
Tapcon self tapping screws flat head phillips
tapcon size: 3/16"x1-1/4"
drill bit size: 5/32"x3-1/2"
max. attachment thickness: 1/4"
THREAD-pateneted twin-lead design literally taps threads into concrete. The high thread with notched cutting edges cuts easyily into masonry. The low threads provide stability
SHANK-tapered chank creates progressive tapping action that cuts threads into concrete. 3/16" or 1/4" diameters available.
POINT-nail point guides anchor into pre-drilled hole. Also allows drilling into wood. Anchor is also reversible for easy removal.
DRILL the hole, DRIVE the anchor, Tapcon replaces expansion anchors, powder actuated fasteners, plugs, and screws.
The thickness of the fixture being anchored and the desired embedment in the masonry material determines the anchor length. A minimum of 1" and a maximum of 1-3/4" embedment is recommended. 1/4" diameter anchors are recommended in lightweight block applications where strip-out may be a problem.