Details
1/4" X 2-1/4" WEDGE ANCHORS TYPE 316 STAINLESS STEEL 100/BOX
part # 2714-0020
Wedge Anchors 316 Stainless Steel
size: 1/4"
length: 2-1/4"
hole diameter: 1/4"
min embedment: 1-1/8"
box qty: 100
required hole diameter equals anchor diameter, excellent for setting immediately, can be loaded immediately, can be set in any hole depth, simple installation, nut and washer supplied in package, not for use in brick or block, not advised for use where vibratory loads are high, oversize holes are detrimental and will reduce performance.
INSTALLATION: drill hole 1/2"-1" deeper than anchor embedment. With nut threaded past the end of stud, hammer into position. Tighten finger tight plus an additional 3-5 turns with wrench. If anchor spins in hole, force anchor up using screwdriver until clip binds into concrete.